Edge Over Competition

• Tracking the Sun like a Sunflower allows us to gather and convert more sun to energy.
• The high efficiency combined with tracking, means the system is always pointing at the Sun, gathering the most of the Sun’s rays and converting it to power.
• On a good day, Quadsun can produce up to 70% more energy than other Solar Technologies.

Maximum Conversion Efficiency

• The high reflectivity and precise parabolic mirrors combined with very efficient receivers maximize conversion of sunlight.
• The hot water solution has a unique design that allows benchmark heat rate transfers from the receiver to the medium that needs to be heated.

Low Physical Footprint – Minimal Space

Quadsun systems need close to only half the space required to generate the same amount of energy as compared to other technologies.

A low footprint is the outcome of tracking the sun using high efficiency cells.

Flat Plate Collector - FPC	Quadsun CST-H3500	Evacuated Tube Collector - ETC
Minimum Collector Area in M² = 1.5	Minimum Collector Area in M² = 4.4	Minimum Collector Area in M² = 2
Temperature Difference Delta T in °C = 20	Temperature Difference Delta T in °C = 20	Temperature Difference Delta T in °C = 20
Hot water output in Liters Per Day - LPD = 100	Hot water output in Liters Per Day - LPD = 750	Hot water output in Liters Per Day - LPD =100
Collector Area for 5000 LPD Capacity in M² = 75	Collector Area for 5000 LPD Capacity in M² = 26.4	Collector Area for 5000 LPD Capacity in M² = 100
Number of Collectors in Nos = 50	Number of Collectors in Nos = 6	Number of Collectors in Nos = 50
Temperature Difference Delta T in °C = 20	Temperature Difference Delta T in °C = 20	Temperature Difference Delta T in °C = 20
Hot water output in Liters Per Day - LPD = 5000	Hot water output in Liters Per Day - LPD = 5000	Hot water output in Liters Per Day - LPD = 5000
Collector Area for 5000 LPD with shadow clearances in M² = 85	Collector Area for 5000 LPD with shadow clearances in M² = 54	Collector Area for 5000 LPD with shadow clearances in M² = 110

Reliability

• Chassis manufactured with Laser cut parts
• Galvanized chassis for rust free life
• Die Casted Gearbox
• Slew Gearbox design for Azimuth and Elevation Tracking
• DC Brushless Stepper Motors for Precision Sun-Tracking
• Specially tooled Tempered mirrors with maximum reflectivity
• Mirrors tooled by Rioglass
• Specially designed Receiver for Maximum Heat Exchange

• The structure designed for wind speeds up to 120 Kmph
• Customized Sun tracking Algorithm and Electronics
• Field control Electronics using reliable components
• Sensors to monitor wind speed and temperature
• Flow switch to monitor proper water flow
• Flow meters to record water flow
• Components with best MTBF
• Product Tested and Approved by NISE – National Institute of Solar Energy,/a>