• 1. Adopting the Right Generator for Your Needs
• 2. Installing the Generator in the Right Place
• 3. Setting Up a Maintenance Schedule

Apollo Power Systems offer the best Diesel Generator Solutions in South India. We provide the most reliable Power Generator sets in the world ranging from 15kVA – 4000kVA, catering to a wide range of clientele, from homeowners to large business enterprises.

We are an authorized sales & service Partner for MTU India & Force MTU Power Systems, – a Rolls Royce Diesel Generator manufacturer. These generators are long-lasting, require low maintenance, and are highly fuel-efficient, providing reliable power backup at the least cost possible.

Product Range:

Kohler Power Systems: 15kVA – 380kVA

Force MTU Power Systems: 450kVA – 900kVA

MTU Onsite Energy India: 1010kVA – 4000kVA

Regular maintenance is essential for diesel generators to function efficiently, especially in industries where power reliability is critical. This blog outlines the key monthly checks required to keep your DG in top condition.

• Inspect the air filters to prevent clogging and ensure proper airflow. Check the vacuum indicator for any clogging.
• Check the exhaust system for blockages, leaks, or excessive carbon buildup.

• Examine the fuel tank for leaks and contamination.
• Inspect hoses, clamps, and connections for signs of wear, cracks, or looseness.
• Examine the fuel filter for leaks.

• Verify coolant levels and top up if necessary.
• Check radiator belts for wear and tear and proper tension.

• Monitor lube oil levels and ensure they meet operational requirements.
• Inspect for any oil leaks that could indicate filter, seal, or gasket issues.

• Check battery terminals for sulphate formation or loose connections.
• Ensure the electrolyte levels are sufficient.
• Check the output of the battery charger.

• Verify control panel operations, including positioning of selector switch, alarms, and fault indicators.
• Ensure synchronization settings are correctly configured if running parallel generators.

• Assess ventilation, insulation, and overall safety conditions.
• Keep the DG area clean and free from obstructions.

Critical Operational Parameters to Monitor:

• Engine RPM
• Oil Pressure
• Coolant/Water Temperature
• AC Voltage Output
• Frequency
• Load Amperage
• Battery Voltage

Non-Comprehensive DG AMC & Repair Solutions by Apollo Power Systems

At Apollo Power Systems, we offer DG Annual Maintenance Contracts (AMC) to ensure your generator operates reliably with minimal downtime. Our DG repair and spare parts services cover all major brands, including MTU, FMTU, Mitsubishi, Volvo Penta, Perkins, Kirloskar, Powerol, and Caterpillar.

As a preferred service provider for airports and top-tier industries, we ensure seamless power backup with expert maintenance and timely support. With Apollo Power Systems handling your DG servicing, you can rest assured that your generator will always be ready when needed.

Get in touch today and choose the best service partner for your DG maintenance needs.

Every individual maintains a personal style for their home, keeping in mind safety, efficiency, and functionality. The look of the wall outlets & switches’ components can often make your home look either modern or outdated. Class 1 electrical contractors will always want to help you so that you have the best for your home. Here is a list of activities an electrical contractor will do to upgrade wall outlets & switches, electrical contracting plays a very important role for any building:

If the outlets & switches are a decade old or more, it’s high time to switch to new ones. It’s important to keep wall outlets & switches updated with the present technology. As this will fundamentally work better, in addition to looking stylish and sleek. A reputed electrical contracting team will always brief about it after analyzing the condition of outlets & switches.

Choosing the right electrical contractor can be a daunting task. But these 5 simple tips would help anyone to choose the right electrical contractor.

In case of damage to wall outlets or switches, it has to be replaced. Especially if cracks are developed in the outer cases of the outlets or due to heat if the outlet has overheated it can cause serious hazards to the house and people staying. Calling an electrician immediately and asking for an upgrade and/or repairs, could save property and life of people staying there! Best electrical contractors will always suggest you on the maintenance, costing and how can you bring down the cost of this too.

Outlets that are painted over or improperly installed may look bad or not work as they should. An electrician will make sure your new outlets look fantastic and work as they should.

Apollo Power Systems is known for the best electrical contractor in Bangalore. As they would help in the functioning of your industries/offices/home run efficiently, save money, and look great.

Facilities management is an organizational function that integrates people, location, and process within the physical environment with the goal of efficiently delivering support services and improving people’s quality of life while also increasing core company efficiency. IFM can integrate hard facilities management, which includes building fabric aspects, with soft facilities management, such as security, cleaning, and waste management. Bringing these services under one contract provides you with a single point of contact for customer service, greater coordination amongst FM services, and consolidated prices to keep everything under budget.

It is the professional administration of one or more buildings with the goal of increasing the efficiency and effectiveness of the organizations or inhabitants. Simply defined, it’s a way of bundling many (or all) of your office’s services and operations under a single contract and management team.

1. Streamlined, efficient work and task management

IFM is, at its essence, a reorganization. Depending on your present facilities management structure, this could entail consolidating numerous vendor contracts into a single service agreement or grouping together a long list of activities that were previously handled by separate internal teams. In either case, the strategy yields fewer contracts, teams, and bucketed resources to manage, as well as a bird’s-eye view of management responsibilities. This greater visibility means more effective team management, faster response times to requests, and less downtime for employees when compared to managing each independent stakeholder and each individual activity they handle numerous times.

2. A focus on the bigger picture

The advantages of an IFM-based streamlined structure don’t end there. Rather than bouncing between different activities and teams—or putting out multiple flames at once—this bird’s-eye view lets you match tasks with the bigger aims of the company. You’ll have the time and freedom to take a more strategic approach to facilities management once you’ve stepped away from the constant day-to-day control of workflow. It is simpler to assume a more significant role inside the organization with a broader view of company goals on one hand and more detailed management of fundamental operations on the other. At the end of the day, less micromanagement means more time to consider the larger picture.

3. Reduction of operating costs

Redundancy and overlap are unavoidable when various internal teams are responsible for different aspects of the workplace. Costs can also rise as separate teams devote their time and resources to initiatives that aren’t aligned with the company’s wider objectives. Because there is more visibility with IFM, inefficiencies and wasteful spending become much easier to spot. External sellers are treated the same way. Managing a single budget nearly always results in lower materials and vendor expenses, even before factoring in the increased productivity that comes with managing a single workforce (as opposed to multiple partners or employees)

The three Rs: research, research, research

Switching to IFM requires some basic changes to operations and the adjustment of a number of moving components, therefore it should only be implemented after thorough research. Start with best practices in your area, if possible: reports, white papers, and industry publications should be a helpful source of information. You can also speak with consultants and IFM vendors directly, particularly those with experience in your sector. On the other hand, you should conduct an extensive internal study to determine how your various teams currently operate. Only when you know what your existing system looks like and have identified the most obvious inefficiencies can you establish a plan for IFM deployment.

Establish clear communication

An internal communications plan, as well as taking the required steps to ensure that the entire organization understands the shift, can be quite beneficial. Encourage questions and recommendations by using surveys, focus groups, open meetings, and other change management tools. Finally, implementing IFM requires good communication between multiple stakeholders, so make sure to build close connections across the various teams and contractors before going live.

Clarity in goals & performance indicators

Clear goals and performance indicators, which follow the preceding part, are a kind of critical communication in and of themselves, providing you with information on how the IFM engagement is proceeding. This information can have a big impact now (for example, informing minute modifications) and in the future (deciding tasks outlined in service agreements, for another). As a last communication suggestion, it’s critical to establish and clarify protocols for filing complaints and resolving conflicts; without established procedures, problems can fester and spread across the business.

Take advantage of technology

When it comes to integrated facilities management, technology is critical. IFM is all about integration, as the name implies, and that includes software solutions that can bring all of the diverse components of facilities management together on a single platform. A complete IWMS may make integrated facilities management much easier to adopt by offering a single point of management for all systems and operations. Good software can provide a single user interface from which important FM responsibilities such as space management, move management, and work order processing can all be managed. When it comes to integrated facilities, technology plays a crucial role. It can also provide the statistics and analytics needed to improve integrated facilities management, as well as software integrations that keep all departments up to date and connected.

Apollo Facility Management is one of India’s leading providers of integrated facility management services. We are known for our customers’ dependability, dependability, and value-added services, and we also provide extremely cost-effective facilities management solutions. We manage roughly 60 million square feet of space and provide fully integrated facilities management solutions at our clients’ facilities and workplaces that are cost-effective and long-term.

The transformer is a static device, thus it requires less attention but with proper periodic inspection & diagnostics, it would be possible to avoid the unwanted breakdown. A transformer is the heart of the power network, the maximum availability of it and also to meet the full lifetime of a transformer is a matter to think of.

Solar power in India is the fastest developing industry. There are 300 clear and sunny days in a year. The calculated solar energy incidence on India’s land area is about 5000 trillion kilowatt-hours (kWh) per year. The solar energy in India available for a single year exceeds the possible energy output of all of the fossil fuel energy reserves.

Our country’s solar installed capacity has reached 26 GW as of 30th September 2018. India expanded its solar-generation capacity 8 times from 2,650 MW on 26 May 2014 to over 20 GW as on 31 January 2018. The government had targeted 20 GW capacities by 2022, but ironically, the power producing states in India achieved the target 4 years ahead of the schedule.India made this possible because of the drastic improvements in solar thermal storage power technology in recent years.

Solar energy-producing states in India are leading the renewable energy revolution around the world.

Let’s have a look at top 5 solar states in India that impacted on solar power in last few years:

Karnataka exceeds by standing at the top of the list. It’s the no 1 solar state of India exceeding 5,000 MW installed capacity by the end of the financial year 2017-18. It represents 24% of the market share of the total installed capacity in India as of 2018. The Pavagada Solar Park is the Karnataka’s solar energy producers. It has an installed capacity of 600 MW. In addition, it’s aiming for ultimate 2,000 MW installed capacity by the end of the year 2020.

Telangana ranks second in the list when it comes to solar energy generation capacity in India. It has a solar power generation capacity of 3400 MW. It further aims at achieving a capacity of 5000 MW by 2022.

The Andhra Pradesh has more than 2049 MW of installed photovoltaic capacity as on 31st July 2017. 1000 MW was commissioned at Kurnool Ultra Mega Solar Park which has become the world’s largest solar power plant as of October 2017.

Rajasthan is said to be one of India’s most solar-developed states. It has total photovoltaic capacity reaching 2289 MW by the end of June 2018. The Dhirubhai Ambani solar park in Rajasthan is the world’s largest Fresnel type 125 MW CSP plant. Jodhpur has installed capacity over 1500 MW.

Tamil Nadu stands at the 5th position as highest operating solar-power capacity in India as of May 2018. It has a total operating capacity of 1.8 GW. The Kamuthi Solar Power Project is the biggest operating project in the state with 640 MW.

Upcoming solar power plants

The Rewa Solar Park in Madhya Pradesh, India will be one of the biggest solar plants in the world with a proposed solar capacity of 750 MW. It is said that most of the energy produced by the Rewa plant will be sold to the Delhi Metro to reduce its dependence on traditional energy means.

In conclusion, India has set out a solid infrastructure to be the essential part of the energy future. It is well on its approach to turning into a major solar nation in the next decade or so. In other word, the sun would surely shine bright in India’s future.

India is one of the largest contributors to the carbon emission after China and USA. Though steps have been taken to reduce the emission and policies have been implemented, but are they enough?

Let’s find out what challenge we need to overcome and what India’s stand on the Solar Energy is:

• India’s Solar Power Potential: As per the Ministry of the New and Renewable Energy (MNRE), the country’s total solar potential is 750 GW.
• As of 2018, India’s Solar Grid has reached a capacity of 26 GW in comparison with 3 GW in 2014.

Technical Challenges:

• India’s Capacity Utilization Factor (CUF) of solar photovoltaic is between 11%-30% which is less. CUF is the energy generated as a percentage of installed capacity.
• It’s not cost effective because of its low efficiency of panels and high costs of battery.
• Solar Rooftop System has a high cost of initial installation.
• Competition from Coal Power Generation Plants emerged as cheaper with lesser emissions and higher efficiency.

Lack of Indigenous Manufacturing Capacity for Solar panels:

• India imports over 90% of its solar panels.
• China is flooding India with its solar panel exports which further endanger the growth of Indian Companies.

Other Challenges:

• Availability of Land: 250 acres of land for every 40-60 MW generated.
• Minimal Research& Development done on Solar Technology in India.

Steps Taken To Overcome These Challenges:

• India’s Solar Energy targets: 100 GW solar power installed capacity by the end of 2123022.Ministry of New and Renewable Energy (MNRE) has proposed to achieve it through 60 GW of large and medium scale solar projects, and 40 GW through rooftop solar projects.
• The Ministry of New and Renewable Energy (MNRE) under its scheme has proposed Development of Solar cities.
• Over 34 solar parks in 21 states with an aggregate capacity of 20,000 MW have been approved.
• Scheme for farmers for installation of solar pumps and grid connected solar power plants.
• Sristi Scheme: It is sustainable rooftop implementation for a solar transfiguration of India under which Indian Government subsidizes rooftop solar plant installation.
• International Solar Alliance: Led by India and France that will focus on promoting and developing solar energy and solar products in remote areas. The International Solar Alliance is an alliance of over 122 countries started by India, most of them being sunshine countries, which lie either completely or partly between the Tropic of Cancer and the Tropic of Capricorn.

So, we can say India is moving the right direction towards using the solar potential and the future looks bright.

In facility management, electrical safety is paramount, and one often-overlooked aspect is earth pit maintenance. Earth pits play a crucial role in ensuring a safe and efficient grounding system, protecting both equipment and personnel from electrical hazards. Regular earth pit cleaning and maintenance is essential to maintain low resistance and effective earthing.

• Ensures Electrical Safety – A well-maintained earth pit prevents electrical shocks and system failures by providing a low-resistance path for fault currents.
• Prevents Corrosion & Blockages – Over time, dust, debris, and moisture accumulation can lead to corrosion and reduced conductivity.
• Regulatory Compliance – Many industries and regulatory bodies mandate periodic earth pit inspections and maintenance for safety compliance.
• Enhances Equipment Longevity – A stable grounding system prevents equipment malfunctions and reduces the risk of damage due to electrical surges.
• Reduces Downtime & Operational Risks – Poor grounding can lead to unexpected power failures, affecting business operations.

Our Earth Pit Cleaning & Maintenance Services At Apollo Power Systems, we provide comprehensive earth pit maintenance services to keep your facility safe and compliant. Our services include:

• Inspection & Cleaning – Removing accumulated dirt, rust, and debris to ensure a clear and functional grounding system.
• Resistance Testing – Measuring earth resistance levels to confirm optimal grounding efficiency. The earth pit testing is typically conducted annually using an earth tester.

However, many local bodies, such as CAG, recommend testing every three months

• Compliance Checks – Ensuring all earth pits meet industry and regulatory standards.
• Regular Maintenance Scheduling – Setting up periodic inspections to prevent unexpected failures.

Understanding Earth Pit Testing and Resistance Standards Earth pit testing is conducted to measure the resistance of the grounding system. As per standard norms, a resistance value below 5 ohms is generally considered acceptable. However, with an increasing number of electronic devices, the recommended resistance level has been reduced to below 1 ohm for enhanced safety and performance.

• Avoid Cement Plastering Inside the Pit: The surface of the soil pit should remain visible, and the surrounding area should not be plastered to ensure proper grounding and soil contact.
• Maintain Clearance: No digging near the earth pit; keep a clearance of at least three feet.
• Prevent Vegetation Growth: Do not plant shrubs or trees near the earth pit.
• Protect the Copper Wire: Do not cut or break the copper wire connecting to plug mains (modem/antenna connections).
• Avoid Waste Accumulation: Ensure that no waste flows near the earth pit to prevent rusting of electrodes and loss of conductivity.

Preventing Erosion in Earth Pit Connections To minimize erosion, apply petroleum jelly on the connected bolts and nuts. This helps protect against corrosion and ensures better longevity of the grounding system.

• Visual Inspections – Quarterly
• Cleaning and Testing – Quarterly | Bi-annually | Annually
• Corrosion Protection – As needed (typically every 2-3 years)

Conclusion A well-maintained earth pit is vital for electrical safety and smooth facility operations. At Apollo Power Systems, we help businesses maintain safe, compliant, and efficient grounding systems through expert earth pit cleaning and maintenance services.

Contact us today to schedule an earth pit inspection and ensure the safety of your facility!

Facility Management according to European standards is an Integrated process within the organization to maintain and developed the agreed services which support and improve the effectiveness of the primary activities. In simple terms it refers to the maintenance of an organization’s buildings and equipments. The Importance of Facility Management involves in having long term strategic plans to make most out off the operating assets.The International Facility Management Association (IFMA) defines facility management as “a profession that encompasses multiple disciplines to ensure functionality of the built environment by integrating people, place, process and technology.” i.e., Facility Management Services consist of various services such as building maintenance, people integration, process integration, technology integration etc. in the organization which aims to ensure the working of the organization.

The world of Facility Management continues to expand and include the management of a wide spread of peoples’ skills, tangible assets and aid services. Due to rapid change in technology and fast growing industries, facilities management professionals have extensive responsibilities comprising services of qualified & skilled Engineering professionals to handle routine, Administrative and technical support from back-end support staff, Periodical maintenance to ensure maximum uptime in respect of all utility equipments & Performing a Technical Audit from Corporate/ Operations team & much more. Any new products/services of facility management actually goes through 3 stages: planning, execution & implementation of the project as key decision makers are always on field to come up with fresh and innovative solutions to meet the organization goals.

The process for executing the strategic plans involves analyzing the current processes, looking into the gaps and fixing them. Then comes the planning process, where new process implementation is planned. Next the process is implemented. Then the results are analyzed with the previous results. This cycle continues until the optimum results are attained. Facility management includes management methods and techniques of building management, infrastructure management of an organization and methods of overall harmonization of the work environment of the organization. Organizational Management, SWOT Analysis &Risk Management.

It also involves considering short term day to day operations for high productivity.

In India over the last few years organizations have realized the importance of facility management . Today it has gained prominent position as organizations have identified that well maintained buildings and utilities help effective and efficient functioning.

Today the Importance of Facility Management and its’ benefits are visible to all the organizations.Our Facility Management team consists of professionals involved in Analysis, Maintenance and Repair of the company utilities. They are also strongly involved in vital daily planning activities to help increase employee productivity and reduce costs of the organization.

• It helps to cut costs
• Increase productivity of the employees
• Enhance the skills of people within the organization.
• Ensure that organization abides by the laws and regulations put forth.
• Provides business continuity and manpower protection in an age where security threats are on the rise.
• Enables new working styles and strategies essential for the technology-propelled era.
• Enhances and reflects an organization’s identity and image.
• Creates distinguishable and meaningful career options.

The target for any business is to reduce the costs, enhance staff productivity and generate leads. Good Facility Management process covers almost all the business aspects and takes active involvement in strategic planning to assist a company to achieve their professional objectives.

Apollo Power Systems have been helping organizations to improve the efficiency of there facility management by providing them facility management services which will suit there organization. Apollo Power System is also known for providing Facility Management Training across south India. Trainings help every organization to keep the workspace and people of the healthy work environment, trainings such as Time Management, Stress Management, Managers Training Programs etc..

Do you want to embark on a sustainable journey while also saving big on your energy expenses? If so, Solar power is the answer. With its clean, abundant, and eco-friendly nature, solar energy is the key to reducing your carbon footprint.

In its 2023 Global Market Outlook for Solar Power, IRENA states that India added 14.3 GW of solar power capacity in 2022, which was the highest annual addition of solar power capacity in the world. This made India the world leader in annual solar power growth in 2022. It also states that India’s solar power capacity is expected to reach 280 GW by 2030. This would make India the third-largest solar market in the world, after China and the United States!

1. Reduces Greenhouse Gas Emissions

Solar power generates electricity without burning fossil fuels, which means it produces zero greenhouse gas emissions. By using solar energy instead of traditional fossil fuels, we can significantly reduce carbon dioxide (CO2) and other harmful emissions that contribute to climate change and air pollution.

Thus aligning with the SDGs. While climate change impacts or is impacted by nearly all of the 17 SDGs (hunger, poverty, good health, and more), SDGs 7, 12, 13, 14, and 15 have specific indicators calling for action to cut emissions, reduce pollution of our air, land, and waters, and adopt clean and innovative clean energy technologies.

2. Promotes Renewable Energy Transition

Embracing solar power supports the shift towards renewable energy sources. As the demand for solar energy grows, there will be less reliance on finite and polluting resources like coal, oil, and natural gas. This transition helps ensure a more sustainable and cleaner energy future for generations to come.

1. Reduces Greenhouse Gas Emissions

India is one of the leading countries in the world in terms of solar power adoption. In 2022, India’s solar power capacity reached 100 gigawatts (GW), making it the fifth-largest solar market in the world.

The Indian government has been a strong supporter of solar power, and has set ambitious goals for solar energy adoption. The government’s National Solar Mission aims to achieve 100 GW of solar power capacity by 2022, and 200 GW by 2027.

To be a part of the Solar Power Revolution and harness the benefits we can try Solar Roof Panels. Solar roof panels, also known as solar photovoltaic (PV) panels, are designed to convert sunlight into electricity, allowing you to generate clean, renewable energy right from your rooftop. The amount of energy you can gain from these panels depends on various factors, including the panel’s capacity, your location, and the orientation of your roof. The return on investment (ROI) can also vary, but over time, solar roof panels can significantly reduce your electricity bills and even generate surplus power that can be sold back to the grid , offering a potential return on your initial investment. Going solar not only benefits your wallet but also contributes to a greener, more sustainable future by reducing your carbon footprint.

We at Apollo Power Systems strive towards reducing carbon footprint in India by providing cleaner and smarter energy choices. We are the pioneer in installing solar panels for residential and commercial purposes.

Our team of experts provides customized proposals specific to your property that perfectly suits your needs. We offer the best-customized solutions such as On-grid, Off-grid and Hybrid Solar Solutions. A solar farm in rural country-side land. Green fields and blue sunny sky with white clouds.

Solar power is a clean, abundant, and sustainable energy source that has a number of environmental benefits. It is a win-win for both the environment and your wallet.

We are committed to environmental conservation and clean energy adoption, and the company’s solar power systems help to achieve these goals. So, what are you waiting for? Contact Apollo Power Systems today and start saving money and powering a greener tomorrow.

Visit Apollo Power Systems to know more about Solar solutions or contact +91 9591073031 to schedule a consultation and let us help you get started on the path to a more energy-efficient, cost-effective, and comfortable home or building.